Petroleum Science >2010, Issue 2: 239-244 DOI: https://doi.org/10.1007/s12182-010-0009-9
Research and application of water jet technology in well completion and stimulation in China Open Access
文章信息
作者：Li Gensheng,Huang Zhongwei,Tian Shouceng and Shen Zhonghou
作者单位：
State Key Laboratory of Petroleum Resource and Prospecting, China University of Petroleum, Beijing 102249, China;State Key Laboratory of Petroleum Resource and Prospecting, China University of Petroleum, Beijing 102249, China;State Key Laboratory of Petroleum Resource and Prospecting, China University of Petroleum, Beijing 102249, China;State Key Laboratory of Petroleum Resource and Prospecting, China University of Petroleum, Beijing 102249, China
投稿时间：2009-01-16
引用方式：Li, G., Huang, Z., Tian, S. et al. Pet. Sci. (2010) 7: 239. https://doi.org/10.1007/s12182-010-0009-9
文章摘要
In recent years, rapid progress in the use of high pressure water jets (HPWJ) has been made in oil and gas well drilling, completion, and stimulation; and good results have been achieved in field applications. Advances in technologies and developments of well completion and stimulation with hydrajet are reviewed in this paper. Experiments were conducted to study the characteristics of abrasive water jetting and to optimize jet parameters, which can provide methods for the well completion and hydrajet fracturing. Deep-penetrating hydrajet perforating can create a 2-3 m clean hole with a diameter of
20-35 mm. Multilayer hydrajet fracturing is a process whereby multiple layers are stimulated in a single run without using mechanical packers, thereby reducing operation procedure and risk. Multilateral radial wells can be drilled using hydraulic jetting up to 100 m in length. The technique to remove sand particles and plugs with rotating self-resonating cavitating water jets in horizontal wellbores has been developed and oilfield-tested, which shows promising, cost effective prospects.
20-35 mm. Multilayer hydrajet fracturing is a process whereby multiple layers are stimulated in a single run without using mechanical packers, thereby reducing operation procedure and risk. Multilateral radial wells can be drilled using hydraulic jetting up to 100 m in length. The technique to remove sand particles and plugs with rotating self-resonating cavitating water jets in horizontal wellbores has been developed and oilfield-tested, which shows promising, cost effective prospects.
关键词
-
Water jet, abrasive jet, well completion, perforation, stimulation, horizontal drilling with hydrajet